|
Samscreen, Inc. can provide you with a wide selection of
openings in high carbon, oil tempered, stainless steel, and
wire. All of our woven wire screens meet the same high-quality
standards as our other products, and our experienced staff can
answer any questions you may have. We have compiled some useful
information below that will help you when ordering woven wire cloth. |
 |
|
Determining Finished Panel Size
1) For flat screens, without hooked edges simply measure the
length and width in inches. Example: 72" x
48"
|
 |
|
2) For screens with hooked edges it is
important to use the correct terminology for Inside Clamping
Width, ICW or Outside Clamping Width, OCW. This can be
determined by measuring an old screen, checking your manual, or
calling our staff to see if we have the dimensions for your
particular machine. Give the OCW or the ICW as well as screen
length. Example: 48" OCW x 72" length |
Hook & Edge Styles :
Samscreen has range of woven wire cloth with
different Hook & Edge styles. Shrouding materials include stainless
steel, galvanized, mild steel and copper. Other materials are
available on request. Canvas or rubber inserts are also available
for additional pull-out resistance on. Click to Know More >>
Slot Direction :
When ordering screens with oblong openings it is
important to specify the slot direction. Common phrases used to
describe the slot direction on side tension screens as shown
Click to Know More >>
Installation & Maintenance :
It pays to control your cost of material screening
by using proper installation and maintenance procedures. You can
dramatically increase the life of your screens, control costs etc.
Click to Know More >>
|
